Global car sales growth to benefit Powder Metallurgy industry

News
January 22, 2014

January 22, 2014

The global auto industry is expected to generate 85 million unit sales in 2014, representing an increase of 4% on 2013 which itself recorded a growth of 3.5% to around 82 million units sold worldwide, according to research firm IHS Automotive.

By 2018 IHS forecasts sales to break the 100 million mark driven by rising wealth in emerging markets. “In every major economy in the world we are expecting economic growth,” stated Charles Chesbrough, an economist with IHS. This is encouraging news for the global Powder Metallurgy industry which sells over 70% of all ferrous structural PM components to the automotive sector.

Europe

Following a year of a partial recovery in European vehicle sales in 2013, after 6 years of decline in new car sales, Europe should see growth of 3% in 2014 to around 14 million light vehicles according a forecast issued by Deutsche Bank. From January to December 2013 the EU market recorded sales of 11.85 million new cars, a contraction of 1.7% over 2012 which itself had seen the new car sales market shrink by 8.2%.

The UK recorded a double-digit growth (+10.8%), while Spain posted a more moderate upturn (+3.3%). Germany (-4.2%), France (-5.7%) and Italy (-7.1%) all saw their demand for new cars decline. However, despite a decline in car sales to 2.95 million units in 2013, Germany saw domestic car production increase by 1% over the entire year to 5.45 million cars (Fig. 1).

The German Association of the Automotive Industry (VDA) reported that despite slack sales in recent years, the industry is spending record amounts on research and development. In 2012 manufacturers and suppliers spent a total of €23.5 billion (including external expenditure). Around half of all R&D spending flowed into environmental technologies with manufacturers and suppliers making a valuable contribution to reducing CO2 emissions. Work was continuing on a broad front to advance fuel-saving drivetrains, ranging from the clean diesel and the direct injection petrol engine to plug-in hybrids, purely electric vehicles, hydrogen power and fuel cells.

Russian car and light vehicle sales fell by 5.5% in 2013 to 2.78 million units following 3 years of strong growth. This leaves Russia in second place as the largest automobile market in Europe behind Germany. The Association of European Business (AEB) in Russia stated that it was expecting car sales to further decline by 1.6% in 2014 due to the ‘muted’ economic picture in the country.

Total vehicle sales in Turkey rose 10% year-on-year in 2013 to 853,378 units with car sales soaring ahead by 20% to 664,655 units, stated the Turkey Automotive Distribution Association.

America

The US market recorded a 7.5% increase in light vehicle sales to 15.651 million units in 2013. Deutsche Bank is forecasting US sales to increase by a further 3% to 16.03 million in 2014 and to peak at around 17 million light vehicle sales in 2017. Production in North America is also forecast to rise by 2.1 million vehicles between now and 2020 driven by new plants in the USA and Mexico. Asian car producers are expected to add more than 1 million units of that capacity (Fig. 2).

Canadian light-vehicle sales reached a record 1,739,480 units in 2013, an increase of 4% on 2012, and topping the country’s 11-year-old benchmark of 1,699,884 delivered in 2002 by 40,000 vehicles, or 2.3%.

In Brazil, the world’s fourth-largest auto market, sales declined 0.91% in 2013 from a year earlier to about 3.767 million vehicles, according to Fenabrave.

 

Asia

Asia continues to be main engine for growth in automobile production and China has overtaken the USA as the single largest market for all vehicle types. In 2013 China became the first country in which more than 20 million vehicles were sold in any given year. The China Association of Automobile Manufacturers (CAAM) reported that in 2013, the production and sales of passenger cars were 18,085,200 and 17,928,900 units respectively, up 16.5% and 15.7% year on year. Both sales and production hit new records. Auto sales in China are expected to increase by 9 to 11% in 2014.

South Korean automakers sold a record 8.602 million vehicles last year, a 5% increase on 2012. Sales were fuelled by steady overseas demand for vehicles which largely offset weak domestic sales.

Automobile sales in Japan, the world’s third biggest auto market, rose by just 0.1% in 2013 to 5.38 million vehicles, according to industry data. Strong sales from September countered earlier declines after green car subsidies ended in September 2012. Sales are likely to continue growing year-on-year in the first three months of 2014 but the outlook thereafter is unclear after April when the sales tax will be raised.

India reported a 10% drop in car sales to 1.8 million units in 2013, the first fall in sales in 11 years.

acea-eu-car-regs-2013

Fig. 1 New passenger car registrations by market (provisional, as of 16/1/2014) (Courtesy ACEA)

wardsauto-US-sales


Fig. 2 US light vehicle sales by type (Courtesy WardsAuto InfoBank)

Posted by: Paul Whittaker, Editor Powder Metallurgy Review & ipmd.net

[email protected]   

News
January 22, 2014

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • From powder modification to rejuvenation: Fluidised Bed Reactors in metal powder production and Additive Manufacturing
  • Retech: Enabling the atomisation of reactive and refractory alloys at substantially higher levels of productivity and lower cost
  • Sustainability in Powder Metallurgy: Highlights from the 41st Hagen Symposium
  • Innovations from Japan’s Powder Metallurgy industry: award winners highlight novel automotive and healthcare applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link