Masdar Institute develops rare-earth magnet substitutes

News
September 30, 2015

September 30, 2015

Researchers from Masdar Institute of Science and Technology in Abu Dhabi, UAE, are developing novel, low-cost magnets with improved magnetic properties that can withstand high temperatures to replace expensive rare-earth magnets commonly used in automotive, aerospace, military and energy industries.

Masdar-Institute

 Central to Masdar Institute’s

central courtyard is a

contemporary re-interpretation

of the traditional Arabic

wind tower, which has been

designed to bring cooling breezes

down to ground level

“The novel magnetic materials that Masdar Institute researchers are discovering could support the development of next-generation clean energy technologies, including wind turbines, and have the potential to impact many other key economic industries that rely heavily on strong permanent magnets, including aerospace and defense,” stated Dr Behjat AlYousuf, Interim Provost, Masdar Institute.

“Currently, each megawatt of power generated by a wind turbine requires up to one ton of rare-earth magnets. Our research aims to develop alternative, low-cost magnets that can reduce the cost of wind turbines,” stated Dr Mamoun Medraj, Professor, Materials Science and Engineering, Masdar Institute. Dr Medraj and Post-Doctoral Researcher Dr Ahmad Mostafa are leading the research.

Medraj believes the magnets they are developing will be significantly cheaper and have greater thermal stability than neodymium based magnets, which are the strongest rare-earth magnet used today, making them well-suited for demanding, high-temperature applications such as the power and automotive industries. They also can provide the UAE with a potentially high-value product in the form of cheaper magnets.

“The problem with neodymium magnets is that they are only good up to 150°C. After that, they demagnetize. While our magnets might not have the same amount of magnetic energy as neodymium magnets, it is more thermally stable and cheaper in price,” Medraj explained.

According to a report recently published by the Royal Society of Chemistry, Neodymium demand is expected to increase by 700% over the next 25 years. Future supply of this strategic element may not be sufficient to meet demand, signalling the need for alternative magnet resources.

“Rare-earth metals are used in many applications requiring strong permanent magnets, such as electronics, motors, wind turbines and many other high-tech applications,” added Medraj. “While the entire world has become dependent on these high-tech magnets, over 95% of the global production of rare earth materials currently occurs in China. This creates a supply risk for many reasons.”

Determined to diversify the supply of high-tech magnets, Medraj began his pursuit of cheaper, high-tech magnets that do not rely on expensive rare-earth metals while at Concordia University in Canada, where he worked for 13 years. He brought his innovative research to Masdar Institute a year ago and has been rapidly discovering new magnetic materials since.

In order to discover new combinations of various elements that produce magnetic phases, scientists would try to combine and test different amounts of various elements. This method, however, is extremely slow and can take several years, as potential combinations are unlimited. Medraj’s method speeds the process up to a couple of months. “We have successfully discovered new magnetic phases within different systems and are now in the process of characterizing their magnetic properties,” Medraj stated.

The high throughput screening process developed by Medraj combines thermodynamic modelling and continuous diffusion – experiments in which two or more elements are continuously diffused, or combined, at varying amounts. The continuous spectrum formed, which represents the various element combinations, is analysed and a magnetic force microscope is used to determine if any magnetic phases exist.

The newly discovered magnets, along with the innovative method used to develop them, could result in significantly cheaper and more efficient sustainable technologies needed to support the growth of UAE’s high-tech industries.

www.masdar.ac.ae 

News
September 30, 2015

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • From powder modification to rejuvenation: Fluidised Bed Reactors in metal powder production and Additive Manufacturing
  • Retech: Enabling the atomisation of reactive and refractory alloys at substantially higher levels of productivity and lower cost
  • Sustainability in Powder Metallurgy: Highlights from the 41st Hagen Symposium
  • Innovations from Japan’s Powder Metallurgy industry: award winners highlight novel automotive and healthcare applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link