Proceedings of the PM2010 Powder Metallurgy World Congress, 10th – 14th October 2010, Florence, Italy
Published by: European Powder Metallurgy Association, 2010

<<< Back to contents

Powder Manufacture & Processing

Atomized Low Apparent Density (AD) Iron Powder for Advanced PM Applications
Hanejko, F; Sokolowski, P (Hoeganaes Corp, USA)

New Iron Powder for Low Density Applications
Chagnon, F (Rio Tinto Metal Powders) 

Effect of Melt Composition and Operational Parameters on Powder Characteristics After Water Atomization
Martin, J M; Iturriza, I; Castro, F; Pasupathy, M (CEIT and TECNUN, San Sebastian, Spain)              

Surface Analysis of Prealloyed Steel Powders: Qualitative and Quantitative Aspects
Hryha, E; Nyborg, L (Chalmers University of Technology, Goteborg, Sweden); Gierl, C; Danninger, H (TU Vienna, Austria); Bengtsson, S (Höganäs AB, Sweden)      

Innovative Ultra Rapid Cooling and Atomizing Process Utilizing Vapor Explosion and Production of New Functional Powders
Furuya, M (Central Research Inst., of Electric Power Industry) Arai, T (CRIEPI, Komae, Japan)      

Background Studies and Inplementation of Iron Powder Production from Blue Dust
Fedorov, D (LADOTHERM)          

Production of Sponge Iron Powder by Reduction of By-Products of the  Steelmaking Industry
Torralba, J M (Madrid University Carlos III) Martin Hernandez, M I; Lopez Gomez, F A (CSIC, Spain); Rabanal Jimenez, M E               

Testing of Powders for Sensitivity to Air Effect Segregation
Farnish, R (Wolfson Centre for Bulk Solids Handling Tech) Kulkarni, P; Berry, R J; Bradley, M S A  (University of Greenwich, London, UK); Guillebert, V (Univ. de Rouen, France)      

Oxide Distribution in Prealloyed Water Atomized Steel Powder
Chasoglou, D; Hryha, E; Nyborg, L (Chalmers University of Technology, Gothenburg, Sweden)   

Key Titanium Powder Characteristics Manufactured using the Hydride-Dehydride (HDH) Process
McCracken, C; Barbis, D (Ametek - Reading Alloys, PA, USA)      

Advanced Screening to Produce High Performance Powdered Metals
Riter, G (Virto-Elcan)     

Guidelines for Optimal Selection of Graphite Type for PM  Parts Production
Alzati, L; Gilardi, R; Zürcher, S (TIMCAL SA, Bodio, Switzerland); Pozzi, G: Fontana, S (Metalsinter Srl, Seregno (MI), Italy)               

Porous Structure Characterization of HDH Titanium Powder Sintered in Different Atmospheres for Biomaterial Applications
Barbosa, L (IPEN) Salgado, L (BRATS)      

Study of Influence of the Alloying Elements in the Final Propierties of  B-Ti Alloys Obtained by PM
Devesa Albeza, F; Tojal Domenech, C; Amigo Borras, V (ITM-UPV, Spain); Torres Hernandez, Y  (Universidad de Sevilla, Spain)  

Effect of Electrolysis Parameters on the Morphology and Chemical Composition of Electrolytic Cu-Zn Alloy Powders
Hapçi, G; Orhan,G (Istanbul, Turkey)      

Microstructure Characterisation and Magnetic Properties of Nanocrystalline Cu-Fe-Co-Al2O3 Composite Powders Processed by Mechanical Alloying
Llorca-Isern, N; Porras-Mateu, N; Artieda, C; Escobar-Romana, A; Viladot-Gatnau, D (Universitat de Barcelona, Spain)       

W and WC Powder Prepared from Different Sieved Fractions of WO3
Polak, Z (Global Tungsten & Powders spol. s r.o) Sulc, J

Possible Applications of Self-Decomposing Intermetallic Fe-Al Type Powders in the Form of HVOF and D-Gun Spraying Protective Coatings
Senderowski, C; Bojar, Z (MUT, Warsaw, Poland)             

Composition Changes of Cast Iron Powder Particles Due to Reactions in a Plasma Stream
Volenik, K; Schneeweiss, O. (Institute of Physics of Materials ASCR, Brno, Czech Republic); Chraska, T.; Kolman, B; Chraska, P.(Institute of Plasma Physics ASCR, Prague, Czech Republic)     

Structural and Chemical Characterizations of ODS Ferritic Steels Produced by Mechanical Alloying and Extrusion
Olier, P; Malaplate, J; Hathon, M H; Hamon, D (CEA Saclay); De Carlan, Y (CEA - DEN/DMN/SRMA, France); Oksiuta, Z (Bialystok Technical University, Poland); Baluc, N (Ecole Polytechnique de Lausanne (EPFL), Switzerland)              

Structural and Magnetic Properties of Nanocrystalline  Cu-Fe-Co-Al2O3 Composite Powders Processed by Mechanical Alloying
Llorca-Isern, N; Artieda, C; Porras, N (Universitat de Barcelona, Spain)   

Hydrogen Desorption Properties of MgH2-5at% TiCr1.2Fe0.6 Nanocomposite Synthesized by High-energy Mechanical Alloying
Simchi, A; Mahmoudi, N (Sharif University of Technology, Tehran, Iran); Kaflou, A (Iran Research Center for Science and Technology)      

Mechanosyntesis of CaxLa1-xMnO3 (0<1, Äx=0.1) Perovskites: Crystal Structure and Mixed Ionic-Electronic Conductivity
Bolarin-Miro, A M; Sanchez-De Jesus, F (Universidad Autónoma del Estado de Hidalgo, Mexico)  Cortes-Escobedo, C A (IPN, Mexico); Barba-Pingarron, A (Universidad Nacional Autonoma de  Mexico); Lira-Hernandez, I A

Nanocomposite SHS Powders Produced Using Mechanocomposite-Precursors
Ilyushchenko, A; Talako, T; Letsko, A (Powder Metallurgy Institute,Minsk, Belarus); Grigorieva, T;  Lyakhov, N; Barinova, A; Yakovleva, M (Institute of Solid State Chemistry, Novosibirsk, Russia and Mechanochemistry)   

Soft Magnetic Cu-Co-Ni Composite Materials Produced by Mechanical Alloying, Cold Compaction and Sintering
Lopez, M; Nunez, V; Mangalaraja, R V; Koduri, R; Reyes, D (Univ de Concepcion, Chile); Jimenez, J (CENIM, Spain); Gomez, M E (Univ. del Valle Cali, Colombia)         

Investigation on the High-Energy Ball Milling of Iron-Titanium Powder Mixtures without Process Control Agents
Leal Neto, R M; Falcao, R B; Dammann, E D C C; Rocha, C J (IPEN, Sao Paulo, Brazil)           

Influence of the Filling Factor on the Obtaining of the Ni3Fe Intermetallic Compound by Mechanical Alloying
Popa, F; Voicu, C; Prica, C V; Chicinas, I (TU Cluj Napoca)               

Effect of Mechanical Activation and Mixing Procedures of Elemental Powders on Combustion Synthesis of NbAl3
Rocha, C J; Leal Neto, R M (IPEN/CNEN, Sao Paulo, Brazil)            

Structure and Properties of a Biomedical Co-Cr-Mo-C Alloy Produced by Mechanosynthesis
Sanchez-de Jesus, F; Betancourt-Cantera, J A; Bolarin-Miro, A M  (Universidad Autónoma del Estado  de Hidalgo, Mexico); Torres-Villaseñor, G (Universidad Nacional Autónoma de México)           

High Speed Imaging Techniques for the Analysis of Close-Coupled Gas Atomisation
Mullis, A; Cochrane, R F; McCarthy, I (Leeds University, UK)        
 
Influence of Gas Density on the Atomisation of Melts
Dunkley, J ; Aderhold, D (Atomising Systems Limited, Sheffield, UK)       
 
Spray Angle and Particle Size in the Pressure Gas Atomization of Tin and Tin-Copper Alloys
Achelis, L (University of Bremen) Sulatycki, K (Univ. of Alberta,Canada); Uhlenwinkel, V (Found. Inst. Of M'tls Sci., Bremen); Mädler, L (Univ of Bremen/Found. Inst. Of M'tls Sci., Bremen)
 
Nitriding of Metal Powder
Egger, S; Leitner, H; Raupenstrauch, H (University of Leoben, Austria)   
 
Nano-Sized and Sub-Micron Carbide Powders for Thermal Spraying
Kanerva, U; Suhonen, T; Ritvonen, T; Varis, T; Ritvonen, T; Turunen, E (VTT, Finland); Oksanen, J; Liu, X W; Ge, Y; Hannula, S-P; Söderberg, O (TKK, Finland)              
 
Gas Atomization of NiCrBSi Powders
Kusoglu, I M (University of Dokuz Eylul) Bulbul, B; Akpinar, S (Sentes Bir, Turkey)             
 
Optimization for the Size and Shape of Chambers for the Production of Powders and Granules by Centrifugal Atomization
Sheikhaliev, S (Netramm Ltd) Dunkley, J (Atomising Systems Ltd, Sheffield, UK)     

Purchase proceedings